APPLICATION
HS / FS ring elements owing to their convenient shape & sizes, adapt themselves readily to variety of machines and appliances for which other type of heaters are not suitable. They are being fitted for heating platens, dies of presses. They are in use for melting of glue, wax, easily fusible metals
like leads, tin, solder, hot plates, popcorn machines, high speed packing machines, difussion pumps, kettles, large coffee percolators & wash boilers etc.

APPLICATION

1. Ideal for drying adhesives, ink, paint & epoxy bonding/curing.
2. Laminating.
3. Shrink Packaging.
4. Thermoforming Plastics.
5. Other process requiring fast penetration of heat into metals, wood, synthetic fabrics & plastics.

CONSTRUCTION

Quartz emitters provide medium wavelength radiation and can be the most preferred source of heat when rapid heater response is needed. The modules are comprised of a series of quartz tubes running parallel to each other within a highly reflective steel housing. Each tube contains a coiled resistance wire available in a variety of wattages and voltages. The large variety of sizes, shapes, and watt densities allows quartz emitters to be highly useful in zoning arrangements such as plastic thermoforming sheet-fed applications where complex heating patterns are needed, high-speed roll-fed processes, and machines requiring precise zone control because they are small in size, and can easily be put in larger panels.

Description / Specification of Mounting Clips For Heater

We are involved in offering a wide range of Mounting Clips For Heater to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Mounting Clips For Heater. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Microtubular coiled heaters are manufactured to a revolutionary design, which makes them the best choice in the most demanding conditions. The resistive wire is uniformly distributed in a compacted MgO insulation, with a CrNi-steel outer protection sheath. The heaters are annealed after manufacturing, thus acquiring a high malleability that allows their being subsequently bent into any complex shape, with extremely narrow bending radius. heaters are used in various applications, due to their being intrinsically reliable and highly versatile. They were first designed for a very specific application, the differential heating of plastic injection nozzles, and later become invaluable in the most diverse and demanding applications. Aerospace, railway, chemical, metalworking and food industry, glass and paper industry, automotive, packing, medical industry... all have taken advantage from the use of heaters, with their wide range of possible shapes and their fitness to an unlimited number of applications.

FEATURES

• Surface temperature to 750 °C.
• Mid-to-far wavelength infrared heat source provides uniform heat over a large area.
• Primary emission in the 3 - 10 micron range (no visible light), which is the most efficient wavelength for heating of platics, paper, textiles, and drying of most solvents.
• Available with built-in type K thermocouple.
• Available in 122 x 60 mm, 245 x 60 mm, and 122 x 122 mm sizes.
• Available with pink surface that turns to gray when heating providing evidence of correct operation.
• Clean, non-contaminating, heat operation. Glaze-coated ceramic body with no surface flaking or oxidation as on metal sheath elements.
• Provides perfectly repeatable performance.
• Easily arranged in large arrays that may be set up and controlled in zones.
• Operating life over 5,000 hours minimizes machine downtime.
• Iron alloy element wire provides longer life than nickel-chrome alloy wires.
• Resistant to thermal shock. Heaters are not damaged if hit by water spray

QUARTZ GLASS

The quartz glass is very pure and provides good transmission and temperature resistance

TWIN TUBE

The unique twin tube design offers high radiation power and very good mechanical stability allowing emitters of lengths up to 3.5 meters. Emitters are available in Short Wove, Medium Wave, or Long Wave versions. That gives you the possibili-ty to select the optimum wavelength for the material to bo hooted. Dimensions and filaments are matched to requirements.

GOLD/ WHITE COATED

Twin Tube Infrared Heater is made by virtue of a gold & white coated which con emit heat directly to the product. A coat-ing on the infrared emitters reflects the infrared radiation. Consequently the infrared radiation impinging on the product is virtually doubled.

FEATURES

• Infrared heaters can be matched to material characteristics - following higher process speeds and less energy consumption
• Directed heat only where needed
• Infrared ovens needs less space
• Non contact or medium needed
• Short response times of infrared heaters for switch on / switch off

Strip finned heaters consist of refractory insulated heating element, covered with zinc plated ms or ss sheet with fixing holes. Finned heaters are for more coverage of suface area. They are used where high velocity of air to be heated

APPLICATION

These heaters are generally used where high temperature required in smaller space, as the same is having much watt density than strip heaters. This heater is also applied in air ducts, comfort heaters, load resistors, recirculating ovens etc

Wire would coil is inserted into metallic tube (M.S., S.S., Incolloy etc.) compactly insulated by magnesium oxidised fused powder. The terminals are brazed ruggedly. Rust resistant steel finns are mounted on the tube alongwith the holding clamps. Stainless steel or incolloy sheathed spirally would coil embedded in centre with Mgo. With M4 SS terminal studs. Finns are available either in zinc plated M.S. or S.S. Fully annealed heater is also available for bending / shaping as per requirement. It can be installed either with M.S. brackets, nipple assembly or ferrul type compression fit assembly, suitable to fit in existing duct as per requirement.

Description / Specification of Tubular Finns Heater

We are involved in offering a wide range of Tubular Finns Heater to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Tubular Finns Heater. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

APPLICATION 
Air Heating, dryers, External heating for tanks & vessels.
CONSTRUCTION 
Rectangular section heater, insulated with compacted MgO for quicker heating & better life span.

APPLICATION 

• Heat cylinders / barrels of plastic processing machinery / soft metal melting pots / Vessels / where the heaters are installed without cover and in visible manner.
• Ceramic knuckles withstand very high temperature and it is much rugged in compare to micanite insulating sheet.
• Power - up to 40 Watts / Sq. inch can be accommodate with simple type / On-Off temp. Controlling system. And higher wattage i.e. up to 50 Watts / Sq. inch can be provided if the heater will be operated through thyristor based temp. Controller.
• Suitable for max. surface temperature up to 700° C.
• Heater will have double jacket. First jacket will prevent radiated heat loss and Second / Outer jacket will keep hot surface hidden inside and will not give scorching effect if touched mistakenly. So, it is much safer for the machine operator.
• This jacketed heater will save power considerably, by preventing heat loss.
• It heats the job more quickly & efficiently, thus increases productivity and decreases lost of time.
• This heater is tailor made / can be fabricated as per specific requirement. (size, rating & supply voltage).
• Ideal electric heat source for heating cylindrical surface. 

Description / Specification of Ceramic I.R. Heaters

We are involved in offering a wide range of Ceramic I.R. Heaters to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Ceramic I.R. Heaters. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

APPLICATION 
To heat up dies, platterns, flat, round bottoms, kettles etc.

CONSTRUCTION 
Electric resistant wire element is wound on mica blocks uniformly to heat full surface area. Element is insulated with mica. Sheathing is made out of rust resistant steel sheet fabricated as per the required size.

APPLICATION »
To heat up dies & moulds, where uniform & quicker heat is required, and where more surface are to be covered. To heat dies & moulds, where temp above 400C. is required (max. upto 450C.), more surface area to be covered & quicker heat is required.